PARK FONTE
A media room on the third floor of a townhouse, with two floor-to-ceiling windows, three doors and not enough throw for the screen the owner wanted, answered with Dolby Atmos 7.1.4 on M&K Sound, four 15-inch subwoofers and a JVC projector standing on end behind a mirror to fill a 160-inch-wide screen. A finalist in Best Home Cinema Level I at the CEDIA Awards 2026.
- Area
- 35m²380
- Seats
- 3
- Screen
- 180
- Screen width
- 4064mm
- Audio
- 7.1.4
- Completed
- 2023

A media room on the third floor of a townhouse, with two floor-to-ceiling windows, three doors and not enough throw for the screen the owner wanted, answered with Dolby Atmos 7.1.4 on M&K Sound, four 15-inch subwoofers and a JVC projector standing on end behind a mirror to fill a 160-inch-wide screen. A finalist in Best Home Cinema Level I at the CEDIA Awards 2026.
It is three in the afternoon, and the sun is full on two floor-to-ceiling windows. One tap on the iPad by the entrance draws two layers of blackout across the glass, the ceiling fades to a thin contour of light, and a 2.7 m (8.9 ft) acoustic door weighing about 160 kg (350 lb) closes on the corridor. The first time the owner did this, his friends were on the sofa and Dune was on the screen. They are demanding about picture and sound, and their verdict was one word: wow.
Park Fonte is not a basement cinema. It is a media room on the third floor of a townhouse, with two large windows, three doors, two offices behind it and a wall where a fireplace was supposed to go. Almost everything about this room argued against a cinema. This is the story of how we answered each of those arguments, and of the compromises we made with our eyes open. In 2026 the room was a finalist at the CEDIA Awards in Best Home Cinema Level I.
Sold by a concert
The owner found us the way many of our clients do: on YouTube. He had bought a townhouse without any finishing and set the top floor aside for something unusual, something no one else he knew had. The first plan was a 5.1 or 7.1 system. Then he spent two weeks watching our videos, two a day, and decided that if he was going to invest in a cinema, he would do it properly.
He and his wife came to our demo cinema. The clip that made the decision was an Imagine Dragons concert in Dolby Atmos. He came back later to watch a full film and noticed details in a movie he had already seen several times. The Alcons Audio system in our demo cinema was beyond the budget he had in mind, so the brief became clear:
- As much picture and sound as the budget allows, with a native 4K image.
- No complaints from the neighbors, and none from the two offices next door.
- Keep the floor plan. The room stays a passage to the offices, and no wall moves.
- Keep the interior. The studio that designed the whole townhouse had already drawn this room.
- Turnkey. The house already had many contractors on site. One company was to do the cinema from the first drawing to the last calibration.
The room had three jobs: films and series from Apple TV, the owner’s own library on Dune HD, and games on a PlayStation 5.
Everything a cinema should not have
A dedicated cinema is a closed box, ideally underground. This room was the opposite.
- Two floor-to-ceiling windows on the street side of the first townhouse in the row, with direct sun for much of the day.
- Three doors. The room is the only way into two offices, his and his wife’s. The doors could not move or get wider, because they had to line up with the offices.
- The top floor, the hardest place in a house to isolate.
- A wood-burning fireplace, planned to the left of the screen.
- Not enough throw distance for the screen the owner wanted.
The good news was the shell: a clean rectangle of 35.5 m² (380 sq ft) with a 3.5 m (11.5 ft) ceiling, a good shape for a single row. After the isolation, the false walls and everything hidden inside them, 31 m² (330 sq ft) and a 3 m (9.8 ft) ceiling remained.
During the design stage the owner gave up the fireplace and kept the original hearth on the ground floor. Its flue pipes stayed in the wall, wrapped in insulation, and our isolation shell goes around them. Losing the fireplace also freed the rear wall, and that is where we solved the projector problem.
A light room, by the owner’s choice
Every room we design starts as a 3D model with the loudspeakers, subwoofers, seating, projector and screen already in place. Our interior designer worked inside that model, so every render she produced was technically correct from the start, not just good-looking.
We proposed two directions. The first had dark walls and a dark ceiling, which give a projected image the most contrast. The second stayed close to the studio’s original: light walls in the gray-beige tones of the rest of the house. The owner and his wife chose the light room. The house is full of daylight, and they wanted the media room to feel like part of it. We held firm on one thing: the screen wall is dark.
We say this plainly because the question comes up under every light room we show. A light room lowers contrast, and significantly, whatever projector you put in it. We explained that before the design was approved, the owner had already watched full films in our demo cinema, and the decision was his. Anton, our founder, would have liked a black room here, a true Blackroom. But the room belongs to the client. Our job is to say what each choice costs and then get the most out of the one they make.
After the first films we asked the owner whether he regretted it. He did not. “There is enough contrast on the screen,” he said. If you visited our demo cinema on the same day, he added, you would see a difference. Compared with public cinemas, including expensive VIP screening rooms, the picture and the sound here are better.
The finished room is one of the closest to its renders that we have ever built. His wife chose the colors, the fabrics, the furniture and the rug. The longest decision in the whole project was the color of the ceiling lights: about three weeks of tests.
120 pages before the first stud
Every project starts with the design. For Park Fonte the album runs to 120 pages and covers every subsystem. At the time we still modeled in SolidWorks; today we work in Revit BIM. The room was built in the model layer by layer: the isolation, the false walls, the baffles, the panels, the cable routes and the projector’s optical path. Every conflict was solved on screen before anything was fabricated.
The owner told us that receiving this album is the moment he remembers most. He read it closely and understood that every detail had been thought through. Our project documentation has won CEDIA Awards three times, including for Apex Cinema.
The projector stands on end
The screen is 180 inches diagonal and 160 inches wide, 4.06 m (13.3 ft), almost the full front wall. The main seat sits at the same distance from it, which gives a horizontal viewing angle of 53 degrees, the sweet spot of many studios where films are edited and mixed. We would have liked an even larger image, but the rear wall was the only place for the rear speakers, and it set the limit.
To fill that screen, the projector needed more distance than the room had. Mounted the usual way, in a hush box on the rear wall, the JVC could not open the image to full width in its native mode. Moving it into another room was physically impossible.
So the projector stands vertically. It sits in a ventilated hush box built into the rear wall, lens pointing up, and a mirror above it at 45 degrees folds the beam toward the screen. The fold adds the length of the projector plus about 30 cm (12 in) to the throw. That was enough for the JVC DLA-NZ8 to fill the screen in native mode. It is not the easy option, and we only use it when we have to:
- A front-surface mirror. The reflective layer is on the outside, with no glass over it. Touch it once and it has to be replaced.
- Its own ventilation. A laser projector in a closed box needs a steady flow of cool air.
- No vibration. The box and the mirror are fixed so that heavy bass cannot move the image.
- Alignment. The projector, the mirror and the screen have to agree on every angle, so the image lands square on the frame.
The result fits the screen exactly, and the projector’s fan is sealed away from the listening position. Calculated luminance is 57 nits at full laser power on the woven screen fabric. We used a similar fold with a Barco projector in Apex Cinema. Read more about 4K and 8K projectors.
The screen is our own Blackroom Screens design: an acoustically transparent woven fabric in a velvet frame, with the three front speakers standing right behind it.
Isolation around windows and doors
The shell is the same build-up we have used in basement cinemas for more than ten years, with one change to fit the budget.
- Damped steel framing. The studs carry a vibration-damping layer, so a knock on the wall sounds solid rather than like a drum.
- Mineral wool instead of sandwich panels. Dense 25 mm (1 in) mineral wool replaces our usual sandwich panels. Everything else in the build-up is unchanged, and so is the result.
- A heavy membrane and board layers. A 2 mm mass-loaded vinyl membrane and two layers of gypsum fiber board, plus a third layer of drywall where the walls are painted.
- A floating floor.
The wall build-up is about 80 mm (3.1 in) thick. What made this room harder than a basement were the openings. We could not simply run the shell from corner to corner: every window reveal, every niche and every turn of the wall had to be wrapped. The flush, handleless doors to the offices carry the same isolation in their frames. And the walls mix fabric with painted areas, so the painted finish had to match the fabric in tone and texture. That took a series of paint samples, approved first by our designer and then by the owners.
Then there is the entrance. The townhouse has tall doors throughout, so the cinema door had to be tall too: 2.7 m (8.9 ft) instead of our usual 2.1 m (6.9 ft), and about 160 kg (350 lb). Four people carried it upstairs, with a fifth spotting. From the corridor it looks like every other door in the house, flush with the wall. Behind it, music plays at full level, and in the corridor you could sleep. It holds the bass because of its mass.
The owner tested it himself before his first film night. Between the cinema and the neighbors there is also a corridor and another isolated wall. There has not been a single complaint.
A room where nothing rattles
The ventilation was designed by the house’s HVAC contractor to our acoustic requirements: silencers, vibration-isolated hangers, ductwork wrapped in damping material. We supplied the materials and supervised the installation. The grilles are our job: their exact positions, and the work that keeps them silent.
Then we went hunting. During the finishing stage we ran sine sweeps from 20 to 150 Hz through the subwoofers and listened for anything that answered. The fanless convectors under the windows did: a decorative plate started to resonate on certain notes. So did some ventilation grilles. Each one was found, isolated and fixed. Today the room is acoustically inert. A rattle is the fastest way to pull you out of a film, and there is none here.
One detail was not even in the drawings. The ceiling has a perimeter light niche, and a channel like that produces flutter echo, a thin, high ring after a clap. Our interiors team lined it with black acoustic felt. From the sofa it reads as a velvet-black recess around the light. Clap your hands, and nothing comes back.
M&K Sound in Dolby Atmos 7.1.4
The layout is the one most Dolby Atmos music mix rooms use: seven speakers around you, four overhead and, in our case, four subwoofers. M&K Sound was the most balanced choice for an owner who watches films, listens to music and plays games.
- Screen channels. Three M&K Sound S150 cabinets behind the acoustically transparent screen, all aimed at the main seat. We ran the electroacoustic calculations for this room in the project, and the calibration measurements confirmed them.
- Surrounds. M&K Sound 150 Series speakers hidden behind fabric. The rear pair has an angled front baffle so it fires slightly down. We moved those speakers forward to the fabric and damped the cavity around them, so the furniture adds no boxy coloration.
- Heights. Four M&K Sound 950 Series speakers in the ceiling, on custom brackets behind removable acoustically transparent tiles, turned toward the sofa.
- Subwoofers. Four 15-inch servo-controlled subwoofers with excursion feedback, flat to 15 Hz. Two sit in the front baffle wall near the quarter points to fight standing waves. The other two share a narrow false wall between the doors with the rear surrounds and the projector box, each in a three-layer enclosure.
Each of these speakers has three dome tweeters. That matters more than it sounds. Compression drivers with narrow dispersion often let you hear exactly where a speaker is. Here the field is close to seamless, and a voice travels around the room without jumping from box to box.
The electronics follow the same rule of balance. An Integra DRX-8.4 AV receiver decodes the formats and runs Dirac Live room correction. A Tonewinner multichannel power amplifier drives every speaker, and four Blackroom Audio amplifiers give each subwoofer 400 W. A Trinnov is our default in reference rooms. Here it would have tipped the system off balance, putting money into processing instead of speakers and room. For the same budget, every link in this chain performs at roughly the same level. Read more about audio processors.
Four subwoofers cannot be tuned properly through a receiver alone. A MiniDSP 2x4 HD feeds each one from its own channel. Every subwoofer was time-aligned and phase-matched by hand, then pre-equalized before Dirac Live, so the room correction has less to fix and keeps its headroom. The bass is even across the sofa, deep and very convincing. Read how we plan subwoofers.
A small room that sounds larger
The walls were limited: two windows, three doors and a narrow strip for a speaker. We used every surface that was left.
- The screen wall is filled with 70 mm (2.8 in) of absorption and faced with black fabric. The original specification had carpet here. We replaced it with a premium fabric.
- The right wall is the only one without windows or doors. Modular fabric grilles stand about 35 cm (14 in) off it and make the room symmetrical. Behind them, diffusers at the front and absorbers further back.
- The ceiling is a floating fabric caisson with absorbers at the front and our standard 3D diffusers, the same ones we use in every room.
- The left wall has a short false wall by the old chimney, packed with absorption and hiding the left surround.
- The rug and the pouf in front of the sofa take the first floor reflection and lift speech intelligibility at the main seat. Closed, the blackout curtains absorb too.
The measured RT60 is 0.28 s. The room is 31 m² (330 sq ft), and it sounds like 40 to 45 m² (430 to 480 sq ft). There are no stray reflections, dialogue is clear, and music localizes precisely.
The rack behind the screen
The equipment room is not in one of the offices. It sits behind the screen wall, carved out of the guest room next door: the minimum size for one rack, a small electrical panel and space to walk behind the rack for service.
- A 42U rack with a network switch and a patch organizer.
- The Integra DRX-8.4, the Tonewinner power amplifier and the MiniDSP 2x4 HD.
- Four Blackroom Audio subwoofer amplifiers, 400 W per subwoofer.
- Sources: a Dune HD 8K media player, Apple TV 4K and a PlayStation 5. The console works through the rack’s closed metal doors, because the rack backs onto the screen wall.
- Synology network storage, 48 TB on four 12 TB drives, loaded with demo clips so the owner can show the room to friends.
- An RTI XP-3 control processor for the audio, video and lighting.
- A 1.5 kW UPS for the projector, control system, network and receiver. In a long outage there is time for a controlled shutdown.
- A dedicated electrical panel with separate circuits for the rack and the lighting.
- A dedicated Haier split air conditioner that can run around the clock.
Close the door, and a guest can sleep in the next room. Read how we plan source players.
One tap
By the entrance, an iPad Air on an iPort dock runs our own interface for RTI. You pick a source, set the light, open or close the curtains and adjust three RGB light groups. Scenes cover bright light, dimmed light, all off and film. Film takes one tap: the curtains close, the lights go out, and only a soft contour remains on the ceiling. Even the buttons click.
The lighting runs on HDL: an HDL-MHRCU.433 controller and an HDL-MC48IP-DMX.431 DMX controller handle three LED groups and the recessed spots, with capacitive keypads at the door. A ducted air conditioner and supply-and-exhaust ventilation keep the air fresh. The wall grilles stop short of the floor behind a shadow gap, so the walls seem to float.
Small decisions add up. The bar cabinet has shelves for glasses but no fridge, so nothing hums during a quiet scene. The fridge is around the corner.
Two years, and a week for the bass
From the start of design to a finished room took a little under two years, in step with the rest of the house. We moved stage by stage, with no reason to rush, and the owner paid stage by stage.
Calibration took about a week and a half. Most of it went to the bass and to hunting rattles: the subwoofer positions are non-standard, and so is the room. Once the bass was right, the rest of the system took a day and a half and the picture about half a day. Anton calibrated the room himself, and he says he now knows how almost every centimeter of it sounds.
For the audio, calibrated to HAA standards: MiniDSP UMIK-2, Earthworks M50 and IsemCon EMX-7150 microphones, an AudioBox Go interface, an IsemCon SC-1 acoustic calibrator, REW, Dirac Live and AudioTools. For the video, calibrated to ISF standards in SDR and HDR: a SpectraCal C6 colorimeter profiled with an X-Rite i1Pro 2 spectrophotometer, a Murideo Six-G 4K generator and Calman.
Where it lands on RP22
We designed Park Fonte before CEDIA RP22 was published, when the standard was still on the horizon. Within the budget we targeted Level 2, and every choice above follows from that. An exact level would take a full set of acoustic and mathematical calculations that we have not run. Anton’s estimate after calibration: Level 2 with confidence, and about half of the parameters at Level 3.
By our standards this is an entry-level project, with more compromises than most. The result still surprised Anton himself.
First nights
The owners have not fully moved in yet. The first film night was the original Dune with friends, then a film with his wife. The PlayStation has had about ten minutes so far.
“The main scenario is getting together for a film in an isolated room where nothing distracts you,” the owner told us. “Watching in a living room is different: someone walks past, something is always happening. Here you can sink into the film completely.”
His advice to anyone at the start is practical. Find a room that fits what you want to build: a room that is too small or too large can make good sound impossible within any budget. Learn the subject before you commit, because much of it is not obvious. “Soundproofing is not there so nobody hears you outside,” he said. “It is there so the sound in here is good.” And allow time, especially in a house that is still being built.
System
- Room: media room on the third floor of a townhouse, 35.5 m² (380 sq ft) before the shell and 31 m² (330 sq ft) after it, ceiling 3 m (9.8 ft), two windows, three doors, one row
- Format: Dolby Atmos 7.1.4, 11 loudspeakers and 4 subwoofers
- Processing: Integra DRX-8.4 AV receiver with Dirac Live; MiniDSP 2x4 HD for subwoofer management
- Amplification: Tonewinner multichannel power amplifier; 4 × Blackroom Audio subwoofer amplifiers, 400 W each
- Speakers: M&K Sound; 3 × S150 behind the screen, 150 Series surrounds, 4 × 950 Series in the ceiling
- Subwoofers: 4 × 15-inch servo-controlled with excursion feedback, flat to 15 Hz, two front and two rear
- Video: JVC DLA-NZ8 laser projector, mounted vertically in a ventilated hush box with a 45-degree front-surface mirror; calculated 57 nits
- Screen: Blackroom Screens, acoustically transparent woven fabric, 180 inches diagonal, 160 inches wide, 53-degree viewing angle from the main seat
- Sources: Dune HD 8K media player, Apple TV 4K, PlayStation 5, Synology storage 48 TB
- Control and lighting: RTI XP-3 with a custom iPad interface; HDL lighting with capacitive keypads; motorized blackout curtains
- Power: dedicated electrical panel; 1.5 kW UPS
- Isolation: room within a room, floating floor, wall build-up about 80 mm (3.1 in); Blackroom acoustic door, 2.7 m (8.9 ft) tall, about 160 kg (350 lb)
- Acoustics: RT60 0.28 s
- Calibration: HAA (audio), ISF (video, SDR and HDR), by Blackroom
- Design: 120-page project album in SolidWorks; a little under two years from design to handover
Awards

Inside the room












Every legendary project starts with a conversation
Tell us about your room and what you want to experience.


