Ready-made home cinema

Pre-engineered cinema rooms

A home cinema or media room in a house that is already finished. Three proven designs, no construction work and professional equipment, in about six months instead of the eight to twelve a bespoke room takes.

~6Months turnkey
1Month of design instead of 2–2.5
60%Up to, saved on finishing
0Construction work
Who it is for

For people who want the room now

A properly built private home cinema takes eight to nine months or more, and that is normal. Since our first days, we have been asked for something faster.

  • On a deadline

    You want to watch the first film by the holidays, a birthday or a family occasion.

  • In a finished house

    The renovation was completed long ago, and you do not want builders back in the house.

  • Performance over finishes

    Picture and sound matter more to you than exclusive joinery, and you would rather not pay for it.

Designs

Three designs, from open to concealed

Each design is built from the same proven elements, scales to the size of your room and comes in several color schemes. The difference is how much of the technology you see.

Everything in view

Open Architecture Cinema Design

The most direct route to performance. Acoustic panels and optical diffusers are mounted openly on dark walls and ceiling, the speakers stay in plain sight, and the mood comes from light alone: a cove of LED light along the ceiling and the floor. Almost no finish work, so the budget goes into picture and sound.

  • Exposed acoustic treatment and speakers
  • Optical diffusers on walls and ceiling
  • LED cove and decorative lighting
  • The lowest finishing cost of the three
Color schemesSlate · Navy
Panels on a halo of light

Floating Panel Cinema Design

Large fabric panels with rounded corners seem to float off the walls on a halo of backlight. Speakers and acoustic treatment hide behind them; the ceiling is wrapped in acoustic fabric with rows of track lights, the floor in carpet. Minimal trim: door casing, baseboard and a slim cornice.

  • Dolby Atmos 9.1.6 with four subwoofers
  • Backlit floating acoustic panels
  • Fabric ceiling with track lighting
  • Equipment in a ventilated cabinet
Color schemesWarm neutral
Everything behind fabric

Concealed Cinema Design

The room is wrapped in fabric from floor to ceiling. Removable panels run around the perimeter, lit along the upper and lower edge; subwoofers live in semi-columns at the rear wall, and the projector stands on a dedicated shelf. Every speaker and panel is hidden, yet everything opens for service and upgrades.

  • Removable fabric panels around the perimeter
  • Subwoofers in the screen wall and rear semi-columns
  • Upper and lower light lines
  • Two rows of seating on a riser
Color schemesCamel · Graphite · Chevron
How it works

Where the time and the cost go

Standardization always makes a product faster and less expensive to deliver. We removed exclusivity and kept a set of solutions we know how to build, install and commission.

  • Standard finishes

    A limited set of proven, modular finish solutions instead of a design from scratch. In one design there is almost no finish work at all.

  • Design in one month

    A typical Blackroom design takes two to two and a half months. Here most solutions already exist, so the project is condensed to what is essential.

  • No construction

    In many projects there is no soundproofing shell, so more of the film reaches the rest of the house than with a bespoke room. Inside the room, four to eight subwoofers, precise seating and calibration keep the bass even at every seat.

  • Standard furniture and light

    Developed equipment cabinets, wall finishes, baseboards, ceiling cornices, fixtures and their layout: faster to buy, faster to install.

  • Standard electronics and acoustics

    Speakers, subwoofers, amplifiers and sources are chosen with verified dimensions, so they fit the wall panels, screen-wall niches and cabinets without surprises. Custom joinery that is made, painted and fitted piece by piece has no place here: if it is requested, the room stops being fast.

Budget

What to do with the money you save

Without large, expensive finishes and complex elements that take months to make and fit, the total cost of the room is lower. The released budget can go one of two ways.

  • Invest it in performance

    Move it into the equipment budget and choose a higher line of speakers, processing or projection. A room like this can take eight of our 15-inch subwoofers.

  • Keep it

    Simply reduce the total budget of your home cinema and spend the difference elsewhere.

Comparison

Pre-engineered or bespoke

Both are designed, engineered and calibrated by the same team. The difference is in how the room is built.

Pre-engineered theater roomBespoke private theater
DesignAbout 1 month2–2.5 months
Total timelineAbout 6 months, set by equipment lead times8–12 months
ConstructionNone, installed in a finished roomFull build of the room
SoundproofingReduced or none: more sound reaches the rest of the houseRoom-within-a-room shell
FinishesStandardized designs, no custom joineryDesigned from scratch, custom joinery
Finishing budgetUp to 60% lowerDefined by the design
EquipmentProfessional home cinema brands, almost anyProfessional home cinema brands

Questions

Questions about pre-engineered cinema rooms

Short answers on construction, sound, timing and finishes.

Does a pre-engineered cinema room need construction work?

No. It is installed in an existing finished room. In many projects there is no soundproofing shell and no builders in the house.

How does it sound without soundproofing?

Inside the room, very good: four to eight subwoofers even out the bass from seat to seat, the acoustic treatment sits behind the fabric panels and in the ceiling, and full calibration ties it together. What subwoofers cannot do is keep the sound in. Without an isolation shell, more of the film reaches the rest of the house, so this is a compromise compared with a bespoke private home cinema.

How long does it take?

About six months turnkey, with design condensed to roughly one month. The timeline is usually set by equipment delivery, since specialized home cinema equipment is made to order.

Can I order custom finishes?

You can, but custom joinery takes time to make, paint and fit, so the room will no longer be fast. The point of this line is standardized, proven solutions.

Which equipment can be used?

Specialized home cinema equipment from almost any brand. Speakers, subwoofers, amplifiers and sources are chosen to fit the standard panels, niches and cabinets.

Is it easy to service or upgrade?

Yes. Fabric panels and grilles come off and go back in place, and the electronics sit in a cabinet, so service or an upgrade does not mean taking the room apart.

Contact

Every legendary project starts with a conversation

Tell us about your room and what you want to experience.

Anton Zadnepryannyy
Founder of Blackroom
I would like
Interested in
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.