Explainer
Audio
Sound systems

Sound Systems for Private Theaters

A private theater’s sound is a chain of five links, and the weakest one sets the limit. This is how Blackroom designs loudspeakers, subwoofers, processing, amplification and the room as one system.

Your project

Tell us about your room. We will show how this fits into your system — and where it is not needed.

Discuss this in your system

The door closes, and for a moment the room is so quiet you can hear the fabric of your seat. Then a single cello note comes from somewhere behind the screen — not from a speaker, from the scene itself. A helicopter crosses overhead and your head lifts on its own. When the score swells, the low strings arrive in your chest a fraction before your ears decide they are loud.

No single box produces that. A private theater’s sound is a system of five links — loudspeakers, subwoofers, a processor, amplifiers and the room itself — and the weakest one sets the ceiling for the rest. This page explains how we put the chain together. Each link has its own page, linked below.

Five links, one result

We design the chain from the room outwards, never from a brand catalog. The seating sets the distances, the distances set the output each speaker must deliver, and only then do models enter the drawings.

Cinema loudspeakers

Screen channels stand behind an acoustically transparent screen in a structural baffle wall, so dialogue comes from the actor’s lips. Surrounds and heights are aimed at the seats, not at the walls.

Subwoofers and tactile bass

Four to eight subwoofers placed by calculation, not by convenience, so every seat gets the same bass rather than one lucky chair.

Audio processors

Trinnov or StormAudio decodes Dolby Atmos, DTS:X and Auro-3D, then aligns every speaker in time, level and response to the room.

Amplifiers

Enough clean power for film peaks without strain, installed in a cooled rack outside the room so no fan is ever heard in a quiet scene.

Hi-Fi and high-end music

The same room plays a symphony as convincingly as a film, in stereo or in immersive formats, without a second set of compromises.

How we size a system

CEDIA/CTA-RP22, the recommended practice for immersive audio in homes, describes four performance levels. A level is awarded to a system in a specific room, not to a box. It is the framework we use to agree with an owner what the room is expected to do before a single model is named.

No.
Level
What it asks of the system
1
Level 1 · Baseline
5 channels, seats at least 20 in from walls, peaks of 99 dB and above.
2
Level 2 · Advanced
11 channels, 2.6 ft from walls, peaks from 102 dB. Typical of our media rooms.
3
Level 3 · Reference
15 channels, 4 ft from walls, peaks from 105 dB. Where a private theater starts.
4
Level 4 · Ultimate
More than 15 channels, 5 ft from walls, peaks from 108 dB.

The numbers that matter are not the channel count on the processor. They are the distance from each seat to the nearest wall, the peak level every seat receives without distortion, and how evenly the bass is spread across the rows. Those decide whether a room feels like a cinema or like a loud living room.

Our position

We do not specify speakers first and fit the room around them. The room, the seats and the target level come first; the brands follow. A well-chosen system in a calculated room always beats a famous system in a room nobody measured.

Built into the drawings

Every room exists as a BIM model before equipment is ordered. Speaker positions are fixed to a fraction of an inch, the baffle wall is drawn as structure, cable routes and amplifier heat are calculated, and the acoustic treatment is shaped around the speaker layout rather than added later.

The room-within-a-room shell does two jobs at once: the film stays inside, and the street stays outside. Without that quiet floor, the softest sounds of a soundtrack — breath, rain, a footstep in another room on screen — are lost before they reach you.

Rooms that show the chain at work

Apex Cinema — CEDIA Awards Winner 2025

Alcons Audio CRMS MK2 in Dolby Atmos 11.1.6 with eight subwoofers, aligned on a Trinnov Altitude 32. Each row has its own calibration preset, so the back row hears what the front row hears.

Emerald Cinema — CEDIA Awards Winner 2026

Engineered to RP22 Level 3: Dolby Atmos 9.1.6 with eight feedback-controlled subwoofers reaching down to 15 Hz, calibrated in-house to HAA.

Frequently asked questions

For a reference room, 15 channels or more: three behind the screen, side and rear surrounds, wides where the room allows and four to six overhead channels, plus several subwoofers. A media room usually works well with 7.1.4 or 9.1.4.

The room. The same speakers can sound refined or harsh depending on reflections, bass modes and seating positions. That is why acoustics and speaker layout are designed together.

Yes. We measure the room, then decide whether the gain is in the processor and calibration, in additional channels or subwoofers, or in the acoustic treatment. Often recalibration alone changes the room.

We specify by the room. Our reference systems are built on Alcons Audio, and we also specify JBL Synthesis, Procella, Meyer Sound, L-Acoustics Creations, Pro Audio Technology, Ascendo, Wisdom Audio, Triad and M&K Sound, with Trinnov or StormAudio processing.

Default Rich Text Content

Default Rich Text Content

Contact

Every legendary project starts with a conversation

Tell us about your room and what you want to experience.

Anton Zadnepryannyy
Founder of Blackroom
I would like
Interested in
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.