Brands
Amplifiers

PARASOUND

Halo amplifiers by John Curl, with pure Class A for the first watts, for private theaters across Southern California.

A quiet amplifier for quiet scenes

Late at night the film is almost a whisper: a character breathing, a clock in another room, rain on a window. This is where an amplifier is easy to hear, because any hiss or grain sits right on top of the dialogue. With the right amplifier the quiet stays quiet, and the next loud cue still arrives without strain.

Parasound is an American maker of amplifiers and preamplifiers, based in San Francisco. Its Halo series was designed by engineer John Curl and runs high-bias Class A/AB, so the first watts, where most listening happens, are delivered in pure Class A.

The Parasound models we consider

  • Halo JC 1+. A monoblock of 450 W into 8 Ω, 850 W into 4 Ω and 1,300 W into 2 Ω, with the first 25 W in pure Class A, according to Parasound.
  • Halo A 31. A three-channel amplifier of 250 W into 8 Ω and 400 W into 4 Ω per channel, for the left, center and right speakers.
  • Halo A 51. A five-channel amplifier with the same rating per channel, for surround channels.
  • Halo A 52+. A five-channel amplifier of 180 W into 8 Ω per channel, for surround and Dolby Atmos height channels in smaller rooms.

How loud 25 watts of Class A really is

Sound level at the seat is the speaker sensitivity plus 10 × log of the power, minus 20 × log of the distance. For a speaker of 88 dB at 1 W and 1 m, 25 W and a seat 3.5 m (11.5 ft) away: 88 + 10 × log(25) − 20 × log(3.5) ≈ 88 + 14 − 10.9 ≈ 91 dB. That covers dialogue and most of a film, so on a JC 1+ almost all everyday listening stays inside the pure Class A range.

Above that, the amplifier moves into Class AB for peaks. We check the full chain against the reference level of the room, so the speakers, amplifiers and distance are chosen together.

Parasound or another amplifier

Parasound Halo suits systems where the front channels need a stable, high-current amplifier and the owner also listens to music in stereo. The JC 1+ is stable into very low speaker impedance, which helps with demanding passive speakers. For multichannel cinema we also use the amplification matched to Alcons Audio systems, and consider McIntosh where the rack is meant to be seen. Our honest note: Class A/AB amplifiers run warm even at idle, so the rack needs ventilation and the power load is planned in advance.

Parasound in Southern California

Our Los Angeles office designs private theaters and listening rooms in Los Angeles, Orange County, San Diego and Santa Barbara. Parasound amplifiers usually sit in a ventilated rack next to the theater, with cooling sized for the Class A heat. We design the rack, power and cable routes in the BIM model and calibrate the system on site. Blackroom is a 6× CEDIA Awards Winner, 2022–2026. Discuss your project.

Questions about Parasound

Yes. The Halo A 31, A 51 and A 52+ are multichannel amplifiers for home cinema, and the JC 1+ monoblock suits front channels.

The first watts are delivered in pure Class A, and the amplifier moves into Class AB only for louder peaks.

The Halo circuits were designed by John Curl, who has worked with Parasound since 1988.

Yes. Class A/AB amplifiers run warm even at idle, so the rack needs planned airflow.

Default Rich Text Content

Default Rich Text Content

Where it sits in the system

Read how we choose amplifiers and design Hi-Fi and Hi-End systems alongside the cinema.

Contact

Every legendary project starts with a conversation

Tell us about your room and what you want to experience.

Anton Zadnepryannyy
Founder of Blackroom
I would like
Interested in
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.