CAVALLI ESTATES, DUBAI
A private theater for a villa in Dubai, designed down to the last port before anyone could step into the room. Dolby Atmos 9.1.6, eight subwoofers for Trinnov WaveForming and a 140-sheet Revit project that won Excellence in Documentation at the CEDIA Awards 2026.
- Area
- 320m²320
- Seats
- 7
- Screen
- 145
- Screen width
- 3210mm
- Audio
- 9.1.6
- Completed
.jpeg)
A private theater for a villa in Dubai, designed down to the last port before anyone could step into the room. Dolby Atmos 9.1.6, eight subwoofers for Trinnov WaveForming and a 140-sheet Revit project that won Excellence in Documentation at the CEDIA Awards 2026.
The door closes and the villa falls away. The light along the walls fades, the projector wakes up behind the rear wall without a sound, and the first low note of the film arrives everywhere at once: the same weight in your chest whichever seat you chose. There is no speaker in sight and no fan to hear. There is only the film.
That is the evening this private theater in Dubai was drawn for. What makes the project unusual is how it got there. Every decision behind that moment was made in a 140-sheet Revit model, at a time when no one on our team could set foot in the room. In 2026 the project won Excellence in Documentation at the CEDIA Awards.
One room, four audiences
The owner bought a villa in Cavalli Estates for his young family and called us straight away. For years he had wanted a place where his favorite films would look and sound the way their makers intended.
Before drawing anything, we surveyed how the family actually uses media. He watches films and plays video games. His wife prefers series. The children are all about cartoons. One room had to serve all four of them, every day, and feel right for each.
Two more requirements shaped the brief. The room had to look modern and finished to a high standard, with nothing that read as a technical space. And it had to deliver a feeling the owner already knew: he had spent time in our demo theater and wanted that experience at home. So we set the target from day one: CEDIA RP22 Level 3, the reference tier, in every parameter the room would allow.
A room no one could enter
Then came the obstacle. The villa was still under construction and fit-out by the developer, and no one was allowed inside until the whole property had been handed over to the owner. Even the cinema room was due to receive the developer’s standard finish first.
Waiting for the keys would have cost months. Instead, our team arranged access to a neighboring villa that was already complete, with a room of the same layout, and took the measurements there. That gave us real geometry to start the design.
The ventilation was the second unknown, because the final HVAC layout was not fixed. Rather than guess, we reserved extra space in the ceiling, so the system can be reworked to the theater’s needs without redesigning the room around it.
Concepts that could be built as drawn
We ran a design survey with the owner and proposed several interior concepts. All of them were modern, and every one was drawn around the technical requirements: speaker positions, sightlines, the projector’s throw and the service access were fixed before the decor. Whichever concept he picked, it could be built exactly as rendered. He chose one, and detailed design began.
The 3D model carries photo-realistic textures. The owner could walk through his future theater in renders, and read most of the project without being an engineer.
The picture: native 4K, out of sight and out of earshot
The projector is a JVC DLA-NZ900: three native 4K D-ILA panels and a BLU-Escent laser light source, rated by JVC at 3,300 lumens and 150,000:1 native contrast. It lights a 145-inch 16:9 screen, and in a fully dark room its contrast is what keeps black looking black rather than dark gray.
It sits in a dedicated hush box built into the rear wall, with its own ventilation and sound isolation. In a quiet scene you hear the actors breathing, not a cooling fan. The box also opens for maintenance, so a future projector upgrade is a swap, not a rebuild. Read how we choose projection on our 4K and 8K projectors page.
Eight subwoofers in a 9.1.6 room
The sound system is Dolby Atmos 9.1.6 on Alcons Audio loudspeakers. The subwoofer count does not follow the layout formula, though. Where 9.1.6 describes one subwoofer channel, the design specifies eight.
The reason is Trinnov WaveForming. In an ordinary room, bass bounces off the walls and collides with itself. The result is standing waves: one seat booms at a certain frequency, the next one loses it, and the bass hangs in the air after the scene has moved on. WaveForming works with arrays of subwoofers on the front and rear walls. The front array launches the bass as a plane wave, and the rear array absorbs it before it can reflect back into the room.
What the family feels is simple. The explosion lands with the same force in every seat, and the low end stops the moment the film says it stops. In a room of 320 sq ft, where standing waves are the main enemy of good bass, eight subwoofers are a precise answer to the size of the room. More on bass systems on our subwoofers page.
Every loudspeaker sits behind acoustically transparent panels. Nothing is visible, and the panels lift off for maintenance and cleaning.
A rack you never hear
All the remaining equipment lives in a rack in a separate room. The fans of the amplifiers, the processor and the network gear stay outside the theater, so the quietest scene in a film stays quiet.
One tap from the door
The room runs on an RTI control system. The iPad lives on a charging station on the wall by the entrance, and the owner can also use his own iPhone. Anyone in the family can start a film, a series, a game or a cartoon without knowing what sits behind the panels.
140 sheets: what the owner receives
This is the part the CEDIA jury rewarded. Every technical detail, whether it concerned the construction of the room or the placement of equipment, was reviewed and discussed before it went into the project. The album holds:
- Construction sheets with every dimension for the decorative and technical elements of the room.
- Lighting calculations that find problem areas before they exist, and a schedule of every light source with its specifications, so a failed fixture can be replaced with the right one years later.
- Acoustic modeling: predicted reflection decay time, coverage of each loudspeaker and an analysis of the room’s resonances.
- Equipment placement drawn in enough detail to resolve every integration issue at the design stage, not on site.
- A low-voltage section with connection diagrams that show which ports are used, not just which devices are linked. If a connection drops, a technician knows exactly where to look.
- A cable schedule listing every power and low-voltage cable, the starting point for any future upgrade.
- HVAC sheets showing how the theater’s construction and finishes meet the villa’s ventilation, so the owner never needs a second set of documents.
The sections were coordinated with the owner’s other contractors. That gave us confidence that every decision in the album matched both his expectations and the requirements of every other trade on the property.
Why the drawings come first
There are no small things in a private theater. Every detail settled in the model is one less surprise on site, and the result becomes predictable before the first wall goes up. A system at this level cannot be built well without design of this depth.
Every theater needs service eventually, and the quality of that service depends on the documentation. Here it is a single album that covers every system in the room. Even someone with no technical background can follow most of it, and it is the only reference anyone will need for maintenance or an upgrade.
Cavalli Estates is our third Excellence in Documentation award, after Stingray in 2023 and Apex Cinema in 2025. Across all categories, Blackroom is a 6× CEDIA Awards Winner, 2022–2026.
System
- Format: Dolby Atmos 9.1.6 with 8 subwoofers for Trinnov WaveForming
- Screen: 145-inch, 16:9
- Projector: JVC DLA-NZ900 in a ventilated, sound-isolated hush box in the rear wall
- Processing: Trinnov
- Loudspeakers: Alcons Audio, behind removable acoustically transparent panels
- Control: RTI, iPad on a wall charging station, the owner’s iPhone
- Equipment: central rack in a separate technical room
- Design: Autodesk Revit BIM, 140 sheets
- Target: CEDIA RP22 Level 3
Awards
.jpeg)
Inside the room
.jpeg)
.jpeg)
.jpeg)
.jpeg)
Every legendary project starts with a conversation
Tell us about your room and what you want to experience.


