Private theater

GRAYLINE CINEMA

A two-row private theater in 310 sq ft of concrete under an 8.5 ft ceiling, built for an audiophile who wanted a cinema that also plays music: Dolby Atmos 7.1.4, four 15-inch subwoofers and a 140-inch-wide screen across the entire front wall. A finalist in Best Home Cinema Level II at the CEDIA Awards 2026.

Area
310
m²
310
Seats
6
Screen
160
Screen width
3556
mm
Audio
7.1.4
Completed
2026
CEDIA Awards Finalist 2026
GRAYLINE CINEMA
The project

A two-row private theater in 310 sq ft of concrete under an 8.5 ft ceiling, built for an audiophile who wanted a cinema that also plays music: Dolby Atmos 7.1.4, four 15-inch subwoofers and a 140-inch-wide screen across the entire front wall. A finalist in Best Home Cinema Level II at the CEDIA Awards 2026.

The last track of the demonstration was Hans Zimmer Live in Prague, a concert everyone in this hobby knows by heart, along with exactly how it should sound. As the final chord faded, the owner turned around in his recliner. Anton, our founder, was sitting behind him in the second row. “That’s exactly what I wanted,” the owner said. “It’s even more musical than I thought it would be.”

He is not an easy man to impress. He owns a serious stereo system, his ear has been trained on it for years, and he had listened his way through several showrooms before he came to us. The room he gave us was smaller than anything we normally recommend for a serious private theater: 310 sq ft of bare concrete under an 8.5 ft ceiling. Grayline is the story of how two rows of seats, a wall-sized screen and sound good enough for an audiophile fit into it. In 2026 the room reached the finals of the CEDIA Awards in Best Home Cinema Level II.

Four wishes that did not fit

We usually tell clients that a private theater worth serious money starts at about 320 sq ft. Below that, physics sets the limits: speaker angles, distances to the listener, space for bass. This room had good proportions, but for a single row. Grayline started below that line, and the brief made the room feel smaller still.

  • Two rows of seats. We proposed one row with a bar counter behind it. He listened, thought it over and answered: let it be a compromise, but I want two rows.
  • A screen across the entire front wall. Top to bottom, as large as the wall allows, with a sharp 4K picture.
  • A cinema that plays music. Stereo comes first for him, so the room had to be as musical as a theater can be.
  • A room for more than films. Professional karaoke, PC gaming, a laptop over HDMI for work, and a long list of his own sources, down to an old tape deck.

He came with a fixed budget, asked for a turnkey project and set one clear rule: he would not pay for anything that does not change what he hears or sees. Where it did change the result, he took our advice. That rule shaped every decision in this room.

Trust, built in listening rooms

The owner had followed our YouTube channel for a long time. When he bought the house and started a full renovation, he came to our showroom with his wife. The demo theater won them over with its sound and its picture, but the Alcons Audio system that plays there was far beyond a sensible budget for a room this size.

So we looked for sound with the same character at a different price. Blackroom Audio, our own loudspeaker brand, took on the task and designed a new model for a client this demanding. That is how the LCR10 was born. The owner came back to the showroom several times for interim listening sessions and heard the speaker develop step by step. There were doubts along the way. At one point our project manager simply asked him to trust us and promised the result he wanted to hear.

The first honest conversation was about his stereo system. He wanted to bring it into the cinema. It can be done, but a stereo system and a cinema system have different requirements, and combining them compromises both. We explained that, and he agreed: this would be a self-contained room made for film. Read how we approach Hi-Fi and high-end music in our projects.

Fighting for every inch

We walked into a concrete box, as we do on most projects. Once the concept was approved, we knew the projection distance, the main listening position and where the second row would go. The task was to push the front and rear walls as far apart as possible. Two decisions did it.

  • The front sank into the concrete. We cut into the concrete block wall and set the front loudspeakers and the subwoofer enclosures partly inside it.
  • The projector moved next door. Its hush box is recessed through the rear wall, so the back half of the box sits in the neighboring room. We calculated the cut in advance and agreed it with the house’s chief engineer. The box can be serviced from either side.

Every inch we won went to the seating. The first row has three reclining seats. Behind it, on a 17.7 in riser, stands a wide fixed sofa for guests, high enough that nobody in it looks at the back of a head. Both rows sit where the calculation of the room’s resonances allowed. The sofa is close to the back wall, and we say it plainly: this is the compromise row, and the reference seat is in the center of the first. The owner knew that from the first drawing and loves that row anyway. There is more on that below.

A room designed before it was built

Every room we build exists in full before construction starts. Grayline was modeled in Revit BIM layer by layer: the isolation, every component, every cable, placed with a precision of 0.04 in. Only when everything fit together in this digital twin, with every angle and every position checked, did we produce the drawings. The project album runs to more than 130 pages.

The interior designer we brought in worked inside that same model, with the loudspeakers, subwoofers, seats, riser, projector and screen already in place. She proposed several contemporary concepts, and the owner chose the most minimal one. Her renders were not just beautiful; they were buildable from the start. And the calm walls and ceiling of a minimal room gave us freedom to place every speaker, panel and subwoofer exactly where the sound needed it.

In a room this tight, that work decides whether two rows are possible at all. It is also work the industry recognizes: two of our CEDIA Awards are for project documentation.

Quiet, on a limited budget

For sound that moves the body, a room has to reach Level 3 of CEDIA RP22. That was our target here, within the budget, for the choice of every component and for every engineering system. A room this dynamic needs a silent background.

People live upstairs, and the neighboring rooms are used for sport and everyday life. The owner wanted nobody to disturb anybody, in either direction. The cinema is a room within a room, the same principle we use in every project. To fit the budget, the inner shell uses regular construction materials with heavy soundproofing membranes and vibration-damping layers. The layers follow the same sandwich as in our larger rooms, and it works. The riser is acoustically inert too.

The entrance is our own acoustic door, about 265 lb and 5.1 in thick, and part of the isolation itself.

The shell does a second job that few people expect. Low frequencies cannot be absorbed by mineral wool or by panels hung on a wall. Only membrane constructions tame them, and a soundproofing shell is one large membrane. The same isolation that keeps the film inside the room also keeps the bass under control.

Fresh air arrives in generous volume and very quietly. Ventilation was the one system we did not install ourselves. We wrote the requirements, including silencers and vibration-isolating treatment of every duct, approved the contractor’s design, supplied the isolation materials and supervised the installation. A theater has to be quiet enough for you to hear every whisper on the soundtrack.

While the finishes went in, we tested the room again and again, playing sine tones from 20 to 150 Hz through the subwoofers and listening for anything that buzzed. A few ventilation grilles did; we fixed them more firmly. At reference level, nothing in the room rattles.

Where the budget went

A smaller budget is a question of priorities. We spent it where it changes the sound and the picture, and saved it where it would not.

  • Dolby Atmos 7.1.4, not 9.1.6. Seven speakers around you and four in the ceiling. Most Dolby Atmos home-entertainment mix rooms use this layout, so films and Atmos music from streaming services play here the way they were mixed. In a room this size, a larger layout with eight subwoofers would have spent the budget without a matching gain.
  • Four subwoofers, not one. Two in the front wall and two in the rear wall, which is built to the same depth as the screen wall. Each is a 15-inch Blackroom Audio subwoofer with feedback and cone-excursion control, playing down to 15 Hz. Four is our minimum in any theater, even with a single row: with one subwoofer there is no guarantee you will hear every bass note in every seat. The owner agreed. Here the bass is deep, fast and tight.
  • Bi-amped screen channels. The left, center and right speakers are the Blackroom Audio LCR10, not ordinary two-way boxes. Each pairs a 10-inch Italian professional woofer with a 1-inch compression driver on a SEOS waveguide. There is no passive crossover: each driver gets its own amplifier channel, and the crossover lives in the DSP of the Crown amplifier, tuned in fine steps. The waveguide keeps dispersion wide, even and controlled, which is exactly what stereo imaging needs. Even a plain stereo track from these speakers is a pleasure.
  • A processor that allows real calibration. A Trinnov Altitude16, fed through an audiophile-grade power cable. Mid-range processors simply do not let us go as deep into the tuning as we need to. Read more about audio processors.
  • Clean power. A 17 kW isolation transformer takes the three-phase mains and delivers one clean, balanced phase to the whole system through a custom audiophile-grade power distribution unit. We have the same setup in our own showroom.
  • A screen and projector without savings. On our advice, the owner did not compromise on the picture either. More on that below.

These were the items where the owner listened, took the advice and spent. Sitting in the room, he can hear that the money went where it matters.

Eleven speakers, one sound field

The three LCR10s stand in a baffle wall directly behind the acoustically transparent screen, at the right height for both the picture and the listeners. The surrounds use professional coaxial drivers and sit at the heights RP22 recommends, so their direct sound reaches every seat. The four ceiling speakers are the same model, mounted on custom brackets behind removable acoustically transparent panels.

Every speaker is placed as close to RP22 and Dolby recommendations as the room allows and aimed at one point: between the heads of the first and second rows, in both length and height. That way as many people as possible hear the same thing. Together the speakers divide the room into even sectors around the reference seat, and the sound field has no seams.

Each loudspeaker model has its own preset in the Crown amplifiers’ DSP: a flat near-field response, a crossover and a limiter that keeps every driver safe. The four subwoofers stand as close as possible to the lower quarter points of the front and rear walls, where standing waves do the least damage to bass evenness. Each has its own output on the Trinnov, and we aligned their phase by hand.

The karaoke system runs straight into the front Crown amplifiers and bypasses the processor. When you sing, your voice comes out of the speakers with no delay you can hear.

A screen that is the whole wall

The projector is a flagship JVC DLA-NZ9. It lives in our custom hush box, ventilated with enough cold air to run without strain, and from the cinema side the box opens for service in under a minute.

It lights an acoustically transparent Screen Excellence Enlightor Neo screen, a fabric we use in many projects. The screen is 140 inches wide in 16:9, about 160 inches diagonal, and runs from floor to ceiling across the front wall. Behind it stand the three front speakers and the two front subwoofers. Our calculations gave 89 nits on this screen with the laser at full power, a bright picture for a screen this size and enough headroom for HDR.

From the reference seat in the first row the image spans about 60 degrees of your view, wide enough to see every detail of a 4K frame. Anton places that at the top tier of RP23, the new CEDIA/CTA video recommended practice. We left about 12 in to each side wall on purpose, so reflections from the walls do not wash out the image.

A projection system is never two pieces. It is three: the projector, the screen and the room. Here the fabric, woodwork, carpet and furniture are all dark gray, one of the kindest colors for a projected picture. Nothing in the room competes with the screen, and immersion arrives within seconds.

Grayline: gray, and lines

The room looks simple, and that is the point. The brief was minimalism: nothing loud, all attention on the picture and the sound. Our designer built the room from thin, precise lines, built-in light and muted tones. Panels in a graphite shade alternate with acoustic fabric, and behind them hide the absorbers and every loudspeaker. The result is calm and strict, without aggression in the details.

Dark colors usually make a small room feel smaller. Here they do not, and the lines and the light are why. The lighting is dynamic and changes with the scene: four groups of LED strips and two groups of spotlights. The main lights are mostly for cleaning; everything else is decorative. Step lights stay on during a film, so anyone in the second row can come down safely without turning on the main lights.

The recliners are upholstered in velour. Its soft texture plays against the perfectly smooth panels, and the strict shape of the seats keeps the room free of anything superfluous.

One system, one point of control

The house has its own smart-home integrator and runs on KNX. We still built the cinema as a closed loop: audio, video, lighting and control all answer to one contractor, so responsibility never blurs between teams. The lighting runs on HDL, a budget-friendly platform we have relied on for years in dozens of dedicated theaters: an HDL-MHRCU.433 multifunction controller and an HDL-MC48IP-DMX.431 DMX controller.

For the owner, all of this is one simple interface on an iPad and touch keypads by the entrance. A film, karaoke or a game starts in a couple of taps.

In the riser floor there is a small box with an HDMI cable and three USB 2.0 extenders. A laptop connects to the cinema in seconds, and the gaming PC in the technical room takes any wired keyboard, mouse or controller without extra input lag.

42 units behind the wall

Nothing in the room tells you how much is hidden. Behind the fabric are the speakers and subwoofers. One room away is a small technical room with its own air conditioner, a dedicated electrical panel for the rack, the seats and the lighting, and a 42U rack in which every unit is taken.

  • The Trinnov Altitude16 processor.
  • Crown professional amplifiers with DSP, with a separate channel for every driver of the front speakers.
  • Dedicated subwoofer amplifiers.
  • A professional karaoke system with its own digital mixer, tuned separately.
  • Sources: Apple TV and Zidoo for streaming, Dune HD and an Oppo player for the owner’s own library and discs, his gaming PC and an S-VHS deck for his tape collection.
  • Network storage, a local network and Wi-Fi, with an extra access point inside the projector box.
  • The isolation transformer, the power distribution unit and a 1.5 kW UPS. The UPS carries the projector, the processor, the control system and the network, so a short outage does not stop the film, and a long one leaves time to shut everything down properly.
  • HDL lighting control.

The rack is built to CEDIA practice: power and low-voltage cables run on opposite sides and enter in two separate bundles, and every cable is labeled. The owner loves switching between sources and comparing them, so every one of them had to be integrated and calibrated. That is part of why calibration takes as long as it does. Read how we plan source players.

Built while the house was still going up

Grayline is the most compact room in our portfolio, but every stage repeats what we do in a large one: concept, design, isolation shell, installation, calibration. We delivered it turnkey, everything except the ventilation hardware: acoustics, video, control, lighting, power and networking. The whole process took about seven months.

The house around it was, and still is, under construction. We built the cinema alongside the ventilation, electrical and finishing crews, each on its own schedule and at its own stage. We move faster and demand more than a typical site does, so this took real coordination. We found common ground with every trade and handed the room over on time. Finishing work continues in the house. The cinema is ready.

Forty minutes with the walls open

When the room was finished, our ears and the measurements agreed: the mids and highs were too dead. The room was overdamped, and the stereo image had lost air.

We opened the walls, took out several absorbing panels and moved the rest. Our wall panels detach easily, so the whole job took forty minutes. The decay time came back to target, and imaging and soundstage improved noticeably. We fine-tune passive treatment like this on almost every project: the acoustics of a small room cannot be calculated to 100 percent in advance.

Calibration day

Anton calibrates every serious project himself. He holds HAA certification for audio and ISF for video, and he always plans at least two days for the sound and one for the picture. Grayline was no exception, and he knew the stakes: the owner expected a small miracle, and we had promised one.

For the sound, he used four measurement microphones: Trinnov, miniDSP UMIK-2, Earthworks M50 and IsemCon EMX-7150. They were checked with an IsemCon SC-1 acoustic calibrator, and the measurements ran through REW, Audio Architect and AudioTools. The order of work:

  • near-field EQ of every model in the Crown DSP, gain matching, hiss removal;
  • far-field EQ at the reference seat for large deviations;
  • manual time alignment and first EQ of the subwoofers;
  • Trinnov Optimizer, five measurement points;
  • integration of the front speakers with the subwoofers, bass management;
  • EQ of the subwoofer array, manual EQ of the left and right channels with a moving microphone;
  • a search for the target curve by listening to music, including a correction for a known measurement issue of the Trinnov microphone around 10 kHz;
  • manual EQ of the other channels to the proven left and right curve;
  • level calibration to reference, 0 dB;
  • final listening tests, fine-tuning of the target curve, the subwoofer and LFE level, and audio-video sync.

The karaoke system was tuned separately: first with pink noise, then by ear, singing test songs. The picture was calibrated to ISF in SDR and HDR with Calman, a SpectraCal C6 colorimeter profiled against an X-Rite i1Pro 2 spectrophotometer, and a Murideo SIX-G 4K signal generator.

The presentation lasted about an hour. The owner brought his own content, played old films and ran every source to hear how they differ. We played our reference clips too: James Bond first, then music, which mattered most. Pink Floyd and the Eagles in stereo, music in Dolby Atmos, and finally Hans Zimmer in Prague. That is where the owner turned around.

Then his wife came in with the designer, and they watched again. Later the owner moved to the second row, which had not yet been calibrated for its own position, and said he liked some things even more there. The compromise row turned out to be less of a compromise than the drawings promised.

Built by the team

Grayline was the first project Anton saw in person only once the room was fully assembled, just before calibration. He supervised the design remotely as chief audio and video architect, working closely with our technical director. The first meetings and demonstrations, the construction and the installation were all done by the team. Walking into a finished room he was seeing for the first time was a milestone of its own. After the presentation, the owners thanked the team members by name.

Still getting better

The owners have not moved in yet and visit from time to time. Once the room is in daily use, we expect feedback and fine-tuning, which is normal in the first months of any system. There is room to grow as well: a game console, or 3D through the JVC, can be added without opening a wall.

System

  • Room: 310 sq ft in concrete, ceiling 8.5 ft; three recliners in the first row, a guest sofa on a 17.7 in riser in the second, six seats in total
  • Target: CEDIA RP22 Level 3
  • Format: Dolby Atmos 7.1.4, 11 loudspeakers and 4 subwoofers
  • Processing: Trinnov Altitude16, active DSP crossovers on the front channels
  • Amplification: Crown professional amplifiers with DSP, bi-amped LCR; dedicated subwoofer amplifiers
  • Speakers: Blackroom Audio; LCR10 with a 10-inch professional woofer and a 1-inch compression driver on a SEOS waveguide; coaxial surrounds and ceiling speakers
  • Subwoofers: 4 × Blackroom Audio 15-inch with feedback and excursion control, down to 15 Hz, two front and two rear
  • Video: JVC DLA-NZ9 in a Blackroom hush box recessed through the rear wall; 89 nits by calculation
  • Screen: Screen Excellence Enlightor Neo, acoustically transparent, 140 inches wide, 16:9, about 160 inches diagonal
  • Sources: Apple TV, Zidoo, Dune HD, Oppo, gaming PC, S-VHS deck, network storage, professional karaoke system with digital mixer; HDMI and USB floor box for a laptop and peripherals
  • Power: 17 kW isolation transformer, three phases to one; audiophile-grade PDU; 1.5 kW UPS; dedicated electrical panel
  • Control and lighting: HDL, iPad and touch keypads; 4 LED strip groups, 2 spotlight groups
  • Rack: 42U, fully used, in a technical room with its own air conditioning
  • Acoustic door: Blackroom, about 265 lb, 5.1 in thick
  • Calibration: HAA audio, ISF video in SDR and HDR, in-house
  • Design: Revit BIM, project album of 130+ pages; about seven months from start to handover
Video tour ·

Home cinema for an audiophile: he called it more musical than he expected

Home cinema for an audiophile: he called it more musical than he expected

Awards

Winner
2023
Finalist
Finalist

Best Home Cinema Level I

2026
park-fonte
Finalist
Finalist

Best Home Cinema Level II

2026
grayline-cinema
Highly Commended
Highly Commended

Excellence in Experience Centre Innovation

2026
showroom-blackroom-2-0
Highly Commended
Highly Commended

Best Home Cinema Level II

2026
eternal-classics
Winner
Winner

Excellence in Documentation

2026
cavalli-estates-dubai
Winner
Winner

Best Home Cinema Level II

2026
emerald-cinema
Winner
Winner

Excellence in Documentation

2025
apex-cinema
Highly Commended
Highly Commended

Media Room Level II

2024
millennium-park
Winner
Winner

Best Home Cinema Level I

2024
grey-haven
Winner
Winner

Excellence in Documentation

2023
stingray
Winner
Winner

Best Home Cinema Level II

2023
stingray
Finalist
Finalist

Best Showroom

2022
showroom-blackroom-1-0
GRAYLINE CINEMA
Contact

Every legendary project starts with a conversation

Tell us about your room and what you want to experience.

Anton Zadnepryannyy
Founder of Blackroom
I would like
Interested in
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.