CHRISTIE
Professional RGB pure laser projection with cinema light for large screens in private theaters across Los Angeles and Southern California.
Cinema light at home
The film opens on a desert at noon, and you narrow your eyes before you think about it. The sand is not a pale gray rectangle on a wall: it glows the way real sunlight does, and the shadow under a rock still holds detail. Then the scene cuts to night, and the projector simply pulls the light back. That headroom is what a Christie RGB laser projector brings to a private theater.
Christie builds projection for commercial cinemas, planetariums, theme parks and large venues. Its RGB pure laser projectors generate red, green and blue light directly instead of converting blue laser light through a phosphor wheel, so they reach a far wider color space and keep brightness and color stable over thousands of hours. In a home they are reserved for the rooms where the screen is large and the picture has to carry real cinema light.
The Christie projectors we specify
- M 4K25 RGB. Three-chip DLP with RGB pure laser, 25,300 ISO lumens and more than 96% of the Rec. 2020 color space, according to Christie. The 4K UHD image is produced by Christie’s precision pixel shift from a native 1080p chipset. It weighs 41.7 kg, works in any orientation and runs at full brightness on 220 V. This is the projector in our second demo cinema.
- Griffyn 4K RGB series. Native 4K three-chip DLP with RGB pure laser and more than 96% of Rec. 2020, from about 30,000 lumens upward, with 4K at 120 Hz. For the largest private screens.
- Eclipse. A six-chip DLP RGB pure laser projector with native 4K and true HDR: Christie rates its sequential contrast at up to 20,000,000:1. The third generation, Eclipse G3, was launched at CEDIA Expo 2025 with up to 30,000 lumens.
We are honest about the trade-off. The M 4K25 RGB is not native 4K, and its native contrast is lower than a JVC D-ILA in a fully dark room. Where the screen is large, the light it delivers matters more.
Brightness with headroom
Anton Zadneprianny, our founder, puts it plainly: when a projector has brightness with headroom, that outweighs the deep black of a JVC and, to a lesser degree, a Sony. He estimates the Christie in our second demo cinema at more than three times the brightness of the Barco Freya in Apex Cinema.
Headroom is not about running the image hot. We calibrate the picture to its targets: 14–16 fL for SDR and 108 nits and above for HDR, with high-output RGB laser able to reach 300–500 nits. The reserve goes into HDR highlights, a wide screen at the right light level and a projector that never works at its limit. Compare the platforms on our 4K and 8K projectors page.
Christie in our second demo cinema
In Showroom Blackroom 2.0, Highly Commended at the CEDIA Awards 2026 in Excellence in Experience Centre Innovation, a Christie M 4K25 RGB lights an acoustically transparent Screen Excellence Enlightor Neo screen 170 inches wide. The sound is Alcons Audio in Dolby Atmos 9.1.6 with a Trinnov Altitude32 running 24 channels.
The projector was provided by Christie, and it was Christie’s representative who suggested, after one of our open days, that Blackroom should present the brand in the home segment. Its brightness showed us something we had never seen before: the frame behind the screen fabric. We added a black backing with openings for the high-frequency sections, and the screen disappeared again. The projection window is extended upward, so a second projector, for example a JVC DLA-NZ900, can stand above the Christie and guests can compare the two on the same screen.
Christie in Southern California
Our Los Angeles office designs Christie projection for private theaters in Los Angeles, Orange County, San Diego and Santa Barbara. A 25,000-lumen projector needs its own home: a projection room or a ventilated, acoustically isolated enclosure behind a projection window, a dedicated power line and a service route. We fix all of it in the BIM model before construction, then calibrate the picture to ISF in SDR and HDR. Blackroom is a 6× CEDIA Awards Winner, 2022–2026. Discuss your project, and we will tell you whether your screen needs Christie light.
Questions about Christie
Is a Christie projector suitable for a home theater?
Yes, for a large screen in a dedicated room. It is a professional projector, so it needs a projection room or an isolated enclosure, a dedicated power line and the right lens for the throw.
Is the Christie M 4K25 RGB native 4K?
No. It produces 4K UHD with precision pixel shift from a native 1080p chipset. The Griffyn 4K RGB series and Eclipse are native 4K.
What does RGB pure laser give in a private theater?
Red, green and blue come straight from lasers, without a phosphor wheel. Christie rates the color space at more than 96% of Rec. 2020, and brightness and color stay stable over thousands of hours.
Christie or JVC?
Christie brings brightness with headroom and color volume for a large screen; JVC brings deeper native black in a fully dark room. The screen size and the owner’s priorities decide.
Can a projector be too bright for a home?
Not after calibration. We set the picture to 14–16 fL for SDR and 108 nits and above for HDR; the extra light goes into HDR highlights and keeps the projector away from its limit.
Default Rich Text Content
Where it sits in the system
A projector is one third of the picture; the screen and the room are the other two. Read how we choose projectors, CinemaScope screens and video processors, and how Barco and JVC compare.